Effectiveness of a healthy lifestyle program based on a mobile serious game for childhood cancer survivors: A quasi-randomized trial.

PURPOSE: This study aimed to develop and evaluate the effectiveness of a healthy lifestyle program based on a mobile serious game (HLP-MSG) to enhance the lifestyles of childhood cancer survivors (CCSs). METHODS: This program proceeded in two stages: development and evaluation, using a non-synchronized design with a quasi-randomized trial. The participants were CCSs aged 6-13 years whose treatment was terminated at least 12 months prior. Data were collected at baseline, and post-intervention, with a follow-up after four weeks using the Child Healthy Lifestyle Profile (CHLP). The experimental (n = 26) and control groups (n = 25) were compared. Data were analyzed using descriptive statistics, chi-squared tests, t-tests, and repeated-measures ANOVA. RESULTS: The HLP-MSG promoted a healthy lifestyle by solving 26 quests, including seven sub-elements (nutrition, exercise, hygiene, interpersonal relationships, stress management, meaning of life, and health responsibility). This study revealed significant differences in the interaction between measurement time and group assignment in the CHLP (p = .006) and physical activity (p = .013), one of the seven sub-dimensions. CONCLUSIONS: A healthy lifestyle program based on a mobile serious game is a feasible health education modality to enhance the physical, psychological, social, and spiritual health of CCSs. IMPLICATIONS TO PRACTICE: The findings add to scientific evidence on a mobile serious game for health education among CCSs. The HLP-MSG provides an evolutionary educational modality that can be delivered non-face-to-face to promote CCSs' continuous healthy behavior maintenance. Moreover, the HLP-MSG is adolescent-friendly and can be utilized as a healthcare tool for parents and children to cooperate.

Enhancing the Plasma-Resistance Properties of Li2O-Al2O3-SiO2 Glasses for the Semiconductor Etch Process via Alkaline Earth Oxide Incorporation.

To develop plasma-resistant glass materials suitable for semiconductor etching processes, we introduced alkaline earth oxides (ROs) into a Li2O-Al2O3-SiO2 (LAS) glass. Analysis of glass properties with respect to the additives revealed that among the analyzed materials, the LAS material in which Li2O was partially replaced by MgO (MLAS) exhibited the most favorable characteristics, including a low dielectric constant (6.3) and thermal expansion coefficient (2.302 × 10-6/°C). The high performance of MLAS is attributed to the high ionic field strength of Mg2+ ions, which restricts the movement of Li+ ions under the influence of electric fields and thermal vibrations at elevated temperatures. When exposed to CF4/O2/Ar plasma, the etching speed of RO-doped glasses decreased compared with that of quartz and LAS glass, primarily owing to the generation of a high-sublimation-point fluoride layer on the surface. Herein, MLAS demonstrated the slowest etching speed, indicating exceptional plasma resistance. X-ray photoelectron spectroscopy analysis conducted immediately after plasma etching revealed that the oxidation-to-fluorination ratio of Li was the lowest for MLAS. This observation suggests that the presence of Mg2+ ions in the plasma discharge inhibits the migration of Li+ ions toward the surface, thereby contributing to the excellent plasma resistance of MLAS.

Preparation of Remote Plasma Atomic Layer-Deposited HfO2 Thin Films with High Charge Trapping Densities and Their Application in Nonvolatile Memory Devices.

Optimization of equipment structure and process conditions is essential to obtain thin films with the required properties, such as film thickness, trapped charge density, leakage current, and memory characteristics, that ensure reliability of the corresponding device. In this study, we fabricated metal-insulator-semiconductor (MIS) structure capacitors using HfO2 thin films separately deposited by remote plasma (RP) atomic layer deposition (ALD) and direct-plasma (DP) ALD and determined the optimal process temperature by measuring the leakage current and breakdown strength as functions of process temperature. Additionally, we analyzed the effects of the plasma application method on the charge trapping properties of HfO2 thin films and properties of the interface between Si and HfO2. Subsequently, we synthesized charge-trapping memory (CTM) devices utilizing the deposited thin films as charge-trapping layers (CTLs) and evaluated their memory properties. The results indicated excellent memory window characteristics of the RP-HfO2 MIS capacitors compared to those of the DP-HfO2 MIS capacitors. Moreover, the memory characteristics of the RP-HfO2 CTM devices were outstanding as compared to those of the DP-HfO2 CTM devices. In conclusion, the methodology proposed herein can be useful for future implementations of multiple levels of charge-storage nonvolatile memories or synaptic devices that require many states.

Healthcare utilization for atopic dermatitis: An analysis of the 2010-2018 health insurance review and assessment service national patient sample data.

This cross-sectional, retrospective, observational study aimed to analyze the distribution and healthcare usage patterns of patients with atopic dermatitis using the 2010-2018 Health Insurance Review and Assessment Service data. Patients diagnosed with atopic dermatitis in Korea between January 2010 and December 2018 and registered in the Health Insurance Review and Assessment national database were identified, and 270,008 patients who used healthcare services at least once during this period were evaluated to ascertain the healthcare usage patterns and treatment methods for atopic dermatitis. The number of patients with atopic dermatitis plateaued during the study period, while the number of claims and total expenses increased by a small margin. Atopic dermatitis prevalence was the highest among patients aged <5 years (31.4%), followed by those aged 5-14 years (23.53%) and 15-24 years (15.33%). However, the prevalence in these age groups showed a decreasing trend over time. The most used Western medicine treatments were injections and oral medications involving topical corticosteroids, antihistamine agents, and oral steroids, while it was acupuncture therapy in Korean medicine. The frequency of the most frequently prescribed medication, topical corticosteroid, showed a decreasing trend over time. The findings in this study will inform healthcare policy makers and clinicians across different countries on the usage trends of Western medicine and Korean medicine treatment.

Synthesis of Planar-Type ZnO Powder in Non-Nano Scale Dimension and Its Application in Ultraviolet Protection Cosmetics.

ZnO is one of the most widely used inorganic sunscreens, owing to its fine particle size and UV light shielding capability. However, powders at nanosizes can be toxic and cause adverse effects. The development of non-nanosized particles has been slow. The present work investigated synthesis methods of non-nanosized ZnO particles for ultraviolet protection application. By altering the starting material, KOH concentration, and input speed, the ZnO particles can be obtained in different forms, including needle type, planar type, and vertical wall type. Cosmetic samples were made by mixing different ratios of synthesized powders. The physical properties and the UV blockage efficacy of different samples were evaluated using scanning electron microscopy (SEM), X-ray diffraction (XRD), particle size analyzer (PSA), and ultraviolet/visible (UV/Vis) spectrometer. The samples with 1:1 ratio of needle-type ZnO and vertical wall-type ZnO exhibited superior light blocking effect owing to improved dispersibility and prevention of particle agglomeration. The 1:1 mixed sample also complied with the European nanomaterials regulation due to the absence of nanosized particles. With superior UV protection in the UVA and UVB regions, the 1:1 mixed powder showed potential to be used as a main ingredient in UV protection cosmetics.

Development of PZN-PMN-PZT Piezoelectric Ceramics with High d33 and Qm Values.

To achieve good long-term temperature stability in devices used in energy-conversion applications, this study is aimed at developing combined ceramics, referred to as PZN-PMN-PZT, comprising Pb(Zn1/3Nb2/3)O3 (PZN) and Pb(Mn1/3Nb2/3)O3 (PMN), which are typical relaxor ferroelectric materials, and Pb(Zr,Ti)O3 (PZT). The piezoelectric properties were compared based on several parameters according to the change in the composition ratio between relaxor materials, amounts of Sb2O3 dopant, and Zr/Ti ratio in the PZT system. Finally, we established optimal poling conditions to improve the electrical properties of the optimized piezoelectric material, based on the evaluation of ceramic properties according to the applied voltage during the poling process. The optimized composition of the investigated piezoelectric ceramics is represented by 0.14PZN-0.06PMN-0.80PbZr0.49Ti0.51 + 0.3 wt.% CuO + 0.3 wt.% Fe2O3 with 0.1 wt.% Sb2O3 doping, which yielded the superior properties (d33 = 361 pC/N, Qm = 1234, Tc = 306 °C).

Design and Preparation of Self-Oscillating Actuators Using Piezoelectric Ceramics with High Coupling Factors and Mechanical Quality Factors.

Piezoelectric material properties were optimized to develop materials for an ultrasonic vibrator targeting a high vibration efficiency. Herein, novel materials were developed using a composition represented by 0.08Pb(Ni1/3Nb2/3)O3-0.07Pb(Mn1/3Nb2/3)O3-0.85Pb(Zr0.5Ti0.5)O3 + 0.3 wt.% CuO + 0.3 wt.% Fe2O3 with 0.3 wt.% Sb2O3 doping. A ceramic shape with a thickness of 2 mm was optimized using finite element analysis software, and high values of coupling factors (0.54) and mechanical quality factors (1151) were obtained. This ceramic was used to fabricate a bio-beauty device (frequency = 1 MHz), and the manufactured ultrasonic vibrator indicated that the actuator oscillated with the maximum amplitude at a frequency of 1.06 MHz.

Piezoelectric Ceramics with High d33 Constants and Their Application to Film Speakers.

A multilayer piezoelectric material was fabricated using piezoelectric materials with low-temperature sintering capabilities and high piezoelectric coefficients to develop a functionally superior piezoelectric speaker with a large-displacement deformation. A soft relaxor was utilized to prepare the component materials, with the optimized composition of the investigated piezoelectric ceramics represented by 0.2Pb((Zn0.8Ni0.2)13Nb23)O3-0.8Pb(Zr0.5Ti0.5)O3. Li2CO3 was added to assist the low-temperature sintering conducted at 875 °C, which yielded a multilayer piezoelectric material with superior properties (d33 = 500 pC N-1, kp = 0.63, g33 = 44 mV N-1). A multilayer piezoelectric actuator with a single-layer thickness of ~40 µm and dimensions of 12 × 16 mm2 was fabricated by tape casting the prepared green sheets. Finite element analysis revealed that the use of a PEEK film and a smaller silicone-rubber film as a composite in the diaphragm realized optimal frequency-response characteristics; the vibrations generated by the piezoelectric element were amplified. The optimal structure obtained via simulations was applied to fabricate an actual piezoelectric speaker with dimensions of 20 × 24 × 1 mm3. The actual measurements exhibited a sound pressure level of ~75 dB and a total harmonic distortion ≤15% in the audible frequency range (250-20,000 Hz) at an applied voltage of 5 Vp.

Preparation and Characterization of Planar-Type ZnO Powder with High Aspect Ratio for Application in Ultraviolet- and Heat-Shield Cosmetics.

In this study, a [0001]-plane planar-type ZnO ceramic powder material with a high aspect ratio ranging from 20:1-50:1 is synthesized using the electrolyte collected from zinc air battery power generation. This high aspect ratio may be due to the Zn(OH)2-4 anion dissolved in the electrolyte. The obtained planar-type ZnO exhibits excellent formulation stability and applicability, even when formulated as a cosmetic with a single inorganic ingredient. Compared to commercial ZnO or TiO2 powders, relatively better protection against infrared and ultraviolet (UV) radiation is realized due to its asymmetric characteristics, with a width of approximately 1 µm and thickness of tens of nm. The synthesized planar-type ZnO is mixed with nanosized ZnO or TiO2 commercial powders and formulated into various combinations to achieve a high UV protection rate and heat-blocking effect. In particular, the addition of planar-type ZnO to nanosized TiO2 powders increases the heat-blocking effect, and improves the applicability and formulation stability of the cosmetic formulation, despite the decrease in turbidity. Among all the ceramic powder combinations examined in this study, the best UV protection rate and heat-blocking effect are obtained when the synthesized planar-type ZnO is mixed with microsized and nanosized TiO2.

Expression analysis of miR-221-3p and its target genes in horses.

BACKGROUND: A microRNA (miRNA) is a small non-coding RNA (ncRNA) approximately 20 nucleotides long and it affects gene expression through mRNA cleavage or translational repression. Horses (Equus caballus) have been domesticated and bred to enhance their speed for racing. It has been studied extensively with genetic diversity, origins and evolution. OBJECTIVES: We examined expression patterns of miR-221-3p and its target gene CDKN1C in various horse tissues. METHODS: We used bioinformatic tools to examine target gene, seed region and evolutionary conservation of miR-221-3p. The expression patterns of miR-221-3p and its target gene CDKN1C were analyzed by quantitative polymerase chain reaction (qPCR). RESULTS: Among eight tissues of horse, miR-221-3p was highly expressed in cerebellum and spleen. On the other hand, only medulla was highly expressed in CDKN1C gene. CONCLUSION: Our study provides expression data of miR-221-3p and CDKN1C gene in horse and suggests the fundamental information for future studies in relation to functional importance.

Multiplex PCR using YeaD and 16S rRNA gene to identify major pathogens in vibriosis of Litopenaeus vannamei.

The Vibrio species causing major diseases in Litopenaeus vannamei are Vibrio harveyi, Vibrio alginolyticus, and Vibrio parahaemolyticus. For multiplex PCR primers, YeaD was used to detect the three Vibrio species. Bioinformatic analysis such as MultiPLX and primer-BLAST was used to design stable and species-specific multiplex PCR primers. Multiplex PCR results showed clear band patterns with bands at 185 bp for V. alginolyticus, 396 bp for V. harveyi, 805 bp for V. arahaemolyticus, and 596 bp for common Vibrio species. The minimum concentration of DNA was measured by PCR; the value for V. alginolyticus was 0.1 ng, that of V. harveyi was 0.03 ng, and that of V. parahaemolyticus was 0.003 ng. Taken together, YeaD showed stability and specificity in identifying Vibrio species. Our multiplex PCR amplification method is an effective and inexpensive tool for identifying Vibrio species.